Flagpole Production Line
Flagpole Production Lineby Nick James
Adding a flagpole to your landscape is a great way to show pride in your country or to support your favorite team by flying their colors. Flag poles are a great way of displaying pride for any specific group, state or country. The major challenge for flag poles is the ability to handle the elements. This article will explain how a flag pole's construction raises a flag and keeps it flying no matter the weather.
Lay the galvanized pipe on the ground. Measure 1 foot from one end of the pipe (the top) and mark where the hole is to be drilled to secure the top bolt-on pulley assembly. In like manner, measure 5 feet from the other end and mark where the hole is to be drilled to secure the bottom bolt-on pulley assembly. Make sure the bolt-hole markings on the top and the bottom are lined up as perfectly as possible.
Select a suitable drill bit for the size of bolts which came with the pulley assemblies and drill the top and bottom holes in the pipe. Drill through one side of the pipe wall and continue drilling until the bit exits through the outside of the other wall of the pipe.
Flag poles with external raising assemblies work by using a system of halyards, ropes, and pulleys. The halyard, made of nylon or polyester, is rigged onto the pulleys, also known as the halyard truck assembly. The halyard also has two hooks affixed to it, one for each of the flag's grommets. The pole also has fixtures known as cleats to store excess rope on. For internal assemblies, the trucks are housed inside the pole. Instead of a halyard, the pole uses a cable assembly with counterweights and retainer rings on it.
Thread rope through the pulleys and tie a knot in the rope just above the lower pulley. Connect a flag clip to the rope at this knot, then measure the correct distance to the position of the other flag clip hole on the flag and install another into position on the rope (measure the distance of the holes in the flag itself for accurate positioning of the clips for your particular flag). Dig a square hole where the mast is to be set, 4 feet deep and 2 feet wide. Set 4 feet of the 5-foot end into the hole and have a partner assist by holding the pipe in place, as straight as possible.
There is a barrage of cheap and Flagpoles being imported and sold, that do not comply with the statute. This is bad for a number of reasons. Imported flagpoles are cheaply made and more importantly, the designs, materials, colors, and methods do not compare well with the better quality, longer-lasting, and correctly designed flagpoles made by American manufacturers. The Flag Company Inc specialized in flags and flagpoles designs offered a special edition of flagpoles to comfort your environment with the genius American brand flagpoles that stay for centuries to memorize the history of flagpole production for the future.
Weigh this item in real life on <a href='http://www.flagco.com/'>flagpole</a> and after that <a href='http://www.flagpolewarehouse.com/'>order flagpoles from Flagpolewerehouse</a> for your organization.
---------------------------------------------------
You are receiving this because you signed up for it on 2016-06-10 from IP 105.155.237.26
To fine-tune your selection of which articles to receive, just login here:
http://www.uniquearticlewizard.com/bloggers/
using your username:
To unsubscribe please use the following link:
http://www.uniquearticlewizard.com/unsubscribe.php?mail=yelhadchi.youssefth3@blogger.com&code=88fe7d3b3915ad4bbe166f6122699e31
---------------------------------------------------
0 التعليقات:
إرسال تعليق